Product Description
This kind of 300W Pure Sine Wave Inverter is a device which can invert the DC power of the battery into a sine wave AC of rated voltage output for use by the user load. It is suitable for household appliances, air conditioning equipment, single-phase power equipment, industrial equipment, etc. In addition, it uses liquid crystal display to show battery voltage and output voltage as well as status parameters. Besides, the 300W Pure Sine Wave Inverter has a stronger load-bearing effect and load capacity compared to a square wave or a modified sine wave (step wave). It can carry inductive loads and any other type of universal AC load, with no interference or noise from devices such as refrigerators, televisions and radios, without compromising the performance and longevity of the load device. The 300W Pure Sine Wave Inverter also has the advantages of high quality, delicate design, advanced technology, durability and high cost effective.
Specification
Model |
FP-S-300 |
OUTPUT |
|
AC VOLTAGE |
110 / 120 / 220 / 230 V |
CONTINUOUS POWER |
300w |
SURGE POWER |
600w |
WAVEFORM |
PURE SINE WAVE |
FREQUENCY |
50/60HZ±3% |
AC REGULATION |
±5% |
RECEPTACLES |
2pcs for type 2 , 1pc for type 3.4.5.6 |
LED INDICATOR |
Green LED for power on; Red LED for power fail ure status |
INPUT |
|
DC CURRENT |
40A(12V)/20A(24V) |
NO LOAD CURRENT DRAW |
0.6A(12V)/0.3A(24V) |
DC VOLTAGE |
12V/24V |
VOLTAGE RANGE |
10.5-16VDC(12V)/21-32VDC(24V) |
EFFICIENCY |
>87% |
DC CONNECTOR |
Cable*1pc |
FUSE |
1pcs 3pcs |
PROTECTION |
|
BAT.LOWALARM |
11±0.5v(12v)/22±1v(24v) |
BAT.LOWSHUTDOWN |
10.5±0.5v(12v)/21±1v(24v) |
OVER VOLTAGE |
16±0.5v(12v)/32±1v(24v) |
OVER TEMPERATURE |
55±5°C |
SHORT CIRCUIT PRO TECTION |
Shut-off |
BAT.POLARITY |
Fuse Burn out |
OVER LOAD |
Re-start 2 times, shut down in failed |
ENVIRONMENT |
|
WORKING TEMP |
0~ +40°c |
WORKING HUMIDITY |
20%--90% RH non-condensing |
STORAGE TEMP.HUMIDITY |
30--+70°C/--22F, 10—95% RH |
TEMP.COEFFICIENT |
±0.05%°C(0-55°C) |
http://www.fangpusun-inverter.com/